Isopad IT-ACM heating tape is specifically designed in collaboration with major motor manufacturers, to prevent condensation in rotating electrical equipment, such as electric motors, generators, and even large shipboard alternators.
The tapes are particularly useful on motors which operate in damp or wet conditions. They offer a low-cost, easily installed solution which can save the expense of costly rewinds and plant downtime. The product line covers motor heating tapes for operation on 230 V, 115 V and 48 V, with lengths from 200 mm up to 1702 mm. ACMs are factory-terminated heating tapes having a resistance element which is woven into a glass or polyester yarn carrier. The element / carrier assembly is sheathed in an acrylic adhesive-backed, polyester-film laminated, glass-fibre tape. The tape is terminated with cold leads and a glass-fibre braid outer sheath completes the assembly. The appropriate ACM heating tape is fitted around the end of the motor windings and held in position using narrow gauge tape fastenings (no cords). Normally, one ACM heating tape is installed on each of the stator windings.
MAX Process temperature: up to 155°C
Isopad IT-GW 27 is a factory-terminated heating tape manufactured from a PTFE electrically insulated, resistance wire extruded in silicone rubber.
DThe fabrication means it is suitable for use in wet environments. The outer jacket is smooth and may be washed down for cleaning, which also makes it suitable for use in dirty areas. The IT-GW27 must be used with an appropriate temperature controller. We also offer suitable controllers and sensors for your application.
MAX Process temperature: up to 200°CIsopad IT-SiS10 is a pre-terminated, flexible, and waterproof silicone insulated, heating tape of the highest quality.
It is manufactured according to the latest safety-technology regulations. Four silicone insulated heating conductors are embedded in a protective overbraid made of cupronickel. The temperature depends on the power and the application. Please make sure that the heating tape does not exceed the maximum withstand temperature. The outer jacket is smooth and may be washed down for cleaning.
MAX Process temperature: up to 200°C
Isopad IT-KDL heating cables are specifically designed for internal and external heating of refrigeration drainlines and freezer doors.
KDLs are manufactured from silicone rubber, making them water resistant, and are supplied factory terminated in standard lengths. IT-KDL-SRs are specially produced in a small round form, making them very flexible and ideal for small bore drainlines. Flexible SL and SR versions are standard; SLS and SRS variants are manufactured with a steel braid.
MAX Process temperature: up to 220°C
Isopad IS-KTeS is a pre-terminated, PTFE insulated, heating cable suitable for use where no excessive mechanical loads are expected and moisture may be present.
This flexible and easily installed cable provides inexpensive and versatile heating. Applications include heat tracing of pipes, small containers, tools, machines, extremely thin and short pipes, and machine parts with limited mounting space.
MAX Process temperature: up to 260°C
Isopad IT-TeMS is a pre-terminated, flexible heating tape.
IT-TeMS 2 is used in applications ranging from simple frost protection to temperature maintenance on short pipework and apparatus as well as for general container heating applications. If more power is required, the use of the TeMS 4 or TeMS 6 heating tapes is recommended. The parallel arrangement of the heating conductors provides a wide heat-transfer surface. The temperature depends on the power and the application. Please make sure that the heating tape does not exceed the maximum withstand temperature.
MAX Process temperature: up to 260°C
Isopad IT-ITW/SS pre-terminated resistance heating tape is specially designed for application with temperatures up to 200°C.
The temperature depends on the power and usage. Please make sure that the heating tape does not exceed the maximum withstand temperature. These highly flexible tapes can be easily coiled around pipelines and valves, supports, pumps, flanges, filters, gauges, or other devices of irregular shape. The resistance element forms a closed heating circuit with connections at one tape end only.
MAX Process temperature: up to 260°C
Isopad IT-ITW/SS-M ist ein fertig konfektioniertes Heizband mit Widerstandsdrähten.
Es ist mit einem PTFE-Mantel isoliert, von einem Edelstahlgeflecht umhüllt und mit einer M20-Verschraubung konfektioniert.
Isopad IS-SP is a pre-terminated, very flexible heating cord consisting of a glass
silk insulated, flexible fabric weave with interior heating conductors.
IS-SP-H is a higher temperature variant and SP-V is made with a central core to the spiral heating element. The temperature depends on the power and the application. Please make sure that the heating cord does not exceed the maximum withstand temperature. Owing to its small dimensions, the heating cord is used for heating and compensating for heat loss on short pipes, glass apparatus, or other structures, mainly for laboratory requirements. The heating cord is not moisture-protected and must only be used in dry areas.
MAX Process temperature: up to 450°C
Isopad IT-ITH is a factory-terminated heating tape with go-and-return series resistance heating elements.
They are suitable for high temperature applications in indoor locations or areas where there is no risk of moisture ingress. It is electrically insulated with a silicone varnished glass braid and the heating element is enclosed in a glass woven carrier and terminated with cold tails and a M20 cable-gland.
MAX Process temperature: up to 450°C
Isopad IT-S45 is a pre-terminated, flexible heating tape consisting of a glassfibre insulated, flexible fabric weave with interior heating conductors.
The protective overbraid of the coiled heating conductors meets the requirements of Protection Class I. The temperature depends on the power and the application. Please make sure that the heating tape does not exceed the maximum withstand temperature. This heating tape is typically used for heating and compensating for heat losses on short pipes and small-sized structures. The heating tape is not moisture-protected and must only be used in dry areas.
MAX Process temperature: up to 450°C
Isopad IT-S20 is a pre-terminated, flexible heating tape with a copper-tinned outer braid serving as a protective earthing conductor.
The temperature depends on the power and only the application. Please make sure that the heating tape does not exceed the maximum withstand temperature. This heating tape enables maximum power to be applied even in the case of small surfaces. The heating tape can be used for temperature modification of pipes and structures in the industrial and laboratory sectors.
MAX Process temperature: up to 450°C
The Isopad IT-G25 type is a factory terminated heating tape manufactured from resistance foil or wire heating elements.
The elements are stitched into a total of six layers (three per side) of glassfibre tape, which acts as a carrier. These tapes are suitable for indoor use or areas where there is no risk of moisture ingress.
MAX Process temperature: up to 450°C
Isopad IT-H heating tape is suitable where high power input is needed or where work has to be carried out at high temperatures.
The high-quality quartz glass allows a working element temperature of up to 900°C. This tape should only be used in dry atmospheres with additional electrical protection and always with a temperature regulator.
MAX Process temperature: up to 900°C
Constant Wattage Parallel Circuit Heating Cable for ordinary area use.
FG200 is a parallel circuit, medium wattage, constant power heating cable that can be cut to length to fit the application parameters. It is designed to operate in a variety of process applications in non-chemically aggressive environments where versatile flexibility and on-site assembly is required. FG200 comprises twin electrical conductors insulated with highly flexible silicone rubber as primary insulation. The heating element is spiraled around the primary insulation and connected to the conductor at pre-defined zone lengths of 500mm. The secondary insulation is made of flexible silicone rubber. For additional mechanical protection and electrical safety reasons, the heating cable can be delivered with an optional metal braid.
MAX Process temperature: up to 180°C