Isopad Solution
Engineered Thermal Products & Solutions
  • Allemand
  • Anglais

Heating Jackets

Applications

Isopad heating jackets provide a convenient solution blending the versatility of a heating panel with the convenience of integral insulation. A heating panel excels when it is required to heat a flat surface, while a jacket is the product of choice when a uniform heat source is required for a 3D surface, for example pipes, filter housings, valves and tees.
A distinct advantage is maintenance down-time; it is significantly quicker to remove a jacket with integral insulation than it is with other heating methods such as a heating tape with sensors, lagging and securing tape.
Isopad heating jackets can be manufactured to almost any shape, temperature range and operational consideration.

Key Benefits

  • Process temperature up to 900° C with short heating times.
  • Customized design.
  • Moulded design available
  • Ideal solution when space is limited.
  • Easy assembly.
  • Highly efficient solutions with a perfect combination of performance, insulation and temperature control.
  • Energy efficient layout by customized design.
  • Long lifetime thanks to the continual high quality of fabrication and optimized control of the heating cables.
  • Complete order processing and production in Heidelberg (Made in Germany)

Technology

Silicone jackets (200 °C)

Isopad silicone jackets are fully waterproof and suitable for applications up to 200°C. At the core lies an Isopad silicone panel, insulated with silicone foam and fully encapsulated in silicone rubber.
There is often no need for mechanical fastening as the Isopad silicone jacket is flexible enough to open and position on to the product to be heated but rigid enough to hold itself in position.
Uniform heat density is achieved using decades of experience at the design stage and the heating element is then laid using a numerically controlled 2 axis positioning system.
Isopad silicone jackets provide good resistance to ozone, oxygen, weathering, ageing effects, bacterial and fungal attacks. They are also highly resistant to various chemicals such as alcohol, acetylene, mineral oil, acids, glucose and glues. Isopad silicone heating panels can also be toughened with glass cloth when improved mechanical strength is required.

Glass silk heating jacket (450 °C)

A highly flexible, versatile jacket suitable for applications up to 450°C and produced by encapsulating a resistive heating element within a glass silk outer. Isopad offer this product with several fixing methods from hooks and eyes, to lace, or Velcro depending on the client’s specific needs.

Quartz cloth heating jacket (900 °C)

Identical to the Glass silk heating jacket from a construction perspective, the maximum operation temperature is increased from 450°C to 900°C by changing the insulation material to quartz cloth.

Metal cased heating jacket (900°C)

Isopad heating jackets can be designed using any of the heating cables and tapes within the Isopad range in order to form a robust and protected product. Available with ATEX approval, the Isopad metal cased heating jacket can provide a versatile solution where no other jacket is suitable.

Our service

Includes all steps from the inquiry to the implementation of customer-specific requirements, including the calculation of performance, selection of heating type, temperature control, accessories, installation advice and after-sales service.

Products

Soft jacket IBC heater IIBC-G (to 71°C) 

Isopad IIBC-G soft jacket heater fits several IBC and tote tank sizes with adjustable nylon straps and buckles.

More

Controls temperature with adjustable thermostats. Protects contents and tote tank surface from heat damage with manual reset, high limit, safety thermostats. Designed for caged, plastic, or metal tote tanks / IBCs. The wrap-around blanket design allows you to heat a tote tank / IBC externally without changing the IBC or tote tank. Fits containers with width from 1016 x 1016 mm to 1219 x 1219 mm. Does not contaminate or scorch your product. Fitted using adjustable nylon straps with buckles. An optional top cover is available to reduce heat loss and accelerate heating. Built-in adjustable thermostats allow you to control the temperature, and two separate heat zones allow you to adjust heater output when content levels are lower. 

Heating jackets IJ-S (to 200 °C) 

There are three components in our jacket heaters: a heater, the insulation for that heater, and the carrier for that assembly.   

More

The outer carriers on these versions may be washable. Different shapes are manufactured to customer requirements and many attachment and fastening methods are available. A small number of jacket versions are available with hazardous area approval. 

Heating jackets IJ-G (to 450 °C) 

There are three components in our jacket heaters: a heater, the insulation for that heater, and the carrier for that assembly.     
More

The outer carriers on these versions may be washable. Different shapes are manufactured to customer requirements and many attachment and fastening methods are available. A small number of jacket versions are available with hazardous area approval. 

Heating jackets IJ-Q (to 900°C) 

There are three components in our jacket heaters: a heater, the insulation for that heater, and the carrier for that assembly  
More

The outer carriers on these versions may be washable. Different shapes are manufactured to customer requirements and many attachment and fastening methods are available. A small number of jacket versions are available with hazardous area approval. 

News

  • Drum Heaters
    If media are stored in drums before processing can begin, most media require heating to reduce viscosity and to enable the liquid or semi-liquid be easily removed from the drum.
  • Filtering Heating Solutions
    Filtration is essential in many different processes throughout almost every industry in terms of separation and prevention.
Here you will find a catalog of our data sheets
*Privacy policy